Compressor Clutch

Checking clearance







- Check the clearance between the clutch plate and pulley using feeler gauge:
- The clearance should be 0.3 - 0.5 mm (0.012 - 0.02 in).
- 0.3 mm (0.012 in) clearance all around.
- The clearance should not be 0.6 mm (15/64) at any point.
- Replace the shims if the clearance is not between the given values. The following dimensions are available:
- 0.2 mm
- 0.3 mm
- 1.0 mm