Signal Too Low. Intermittent Fault

Signal too low. Intermittent fault

Intermittent fault
A non-approved key has probably been used because the alarm has been triggered.
Check the key and read off diagnostic trouble codes (DTCs) for the immobilizer.





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Intermittent fault

-------------------------------------------------