Removal and Replacement

Door mirror

Mirror glass




Press in the mirror glass as far as possible on one side.
Insert a screwdriver and press on one of the catches holding the mirror upright.
Pull the mirror out
Disconnect the connector.
Carry out on the other side if necessary.

Installation
Locate the mirror glass mounting pins in the lugs on the swivel assembly.
Connect the connector.
Press the mirror glass into place.
Check that the mirror glass is secure.

Power door mirror assembly




Remove door panel according to Components front side door, replacing Removal and Replacement.
Remove 3 screws.

Note! Check that the rubber seal around the wiring is correctly installed in the lead-in through the door before the panel is installed.

Electric motor





Remove:
- mirror glass, see Mirror glass.
- 3 mounting screws (C) for the electric motor / swivel assembly.
- the connector.
- the electric motor (D).