Rear Seats

Rear Seats

Seat cushion







- Pull out the front edge of the seat cushion.

Backrest

Remove:







- the armrest.
- the seat cushion.
- 2 nuts for the backrest cushion at the outer bottom edge of the cushion.
- the head restraints.
- Lift the backrest cushion out.

NOTE: Press the bottom edge back when it is lifted out.

- Route the belts around the backrest cushion and lift out the cushion.

Head restraint

Removal







- Insert a hand behind the backrest cushion and press the head restraint catches as arrowed (see illustration).
- Lift the head restraint.

Installation
- Press the head restraints down into their bushings and check that the catches engage.

Hatch for long loads

Remove:







- the armrest.
- the seat cushion.
- 2 nuts for the backrest cushion at the outer bottom edge of the cushion.
- 2 clips on the inside of the rear edge of hatch.

CAUTION: If the clips break they must be replaced.

- Angle the backrest cushion forwards and press the long load hatch backwards.

NOTE: Hold the backrest cushion when you press the long load hatch backwards.

- the head restraints.
- Lift the backrest cushion out.

NOTE: Press the bottom edge back before it is lifted out.

- Pull out the long load hatch
- Lift the bottom edge of the surround and press backwards, twist the surround and the bag and remove it diagonally.

Rear seat upholstery
- The method of replacing both sections of the rear seat upholstery is generally the same as for the front seat.

Arm rest in the side panel

Remove:







- rear side panel.
- 2 nuts for the armrest.