Panels

Rear side panel
- Remove rear seat.

Panel







Remove:
- 2 clips at the rear edge.
- 1 clip by B-post.
- 2 clips at the front edge.
Lift panel up and out.

A, B, C/D panels

B-panel







- Remove 2 seat belt screws.
- Lift up B-panel.

Tightening torque
Tighten upper seat belt screw to 48 Nm (35.4 ft.lb).

A-panel







- Remove 2 grab handle screws.
- Pull panel off 4 clips.

CAUTION: If the clips break they must be replaced.

C/D-panel







Remove:
- 2 grab handle screws.
- 1 connector.
- Pull panel off 3 clips.

CAUTION: If the clips break they must be replaced.