Connecting the Air Conditioning (A/C) Compressor

Connecting The Air Conditioning (A/C) Compressor







- Connect the air conditioning (A/C) compressor by connecting the cable terminals at the pressure switch (Pressostat).
- Reinstall the rest of the removed components.

Setting damper motors, damper for self-adjustment

Setting
- Connect the damper motor switch.
- Ignition on.
- Start the blower fan motor.
- Move the damper motor to a limit position using the button for temperature control.







- Turn the damper on the climate control unit to the corresponding position using a screwdriver or similar that can be inserted in the hole.
- Install the motor. Carry out self-adjustment of the damper motor end positions. This is carried out via VADIS communication.