Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Diagnostic trouble code (DTC) ECM-35x3 is stored at start up if the engine control module (ECM) detects that a cylinder misfires during the first 1000 revs of the engine.
Diagnostic trouble code (DTC) ECM-35x3 emission effect or ECM-35x3 three-way catalytic converter (TWC) damage is stored (depending of the seriousness of the misfire) if the engine control module (ECM) detects misfiring after the first 1000 revs after engine start up.
The diagnostic trouble code (DTC) indicates which cylinder is misfiring.

Substitute value
- Three-way catalytic converter (TWC) diagnosis shut off
- Leakage diagnosis shut off
- Rear heated oxygen sensor control shut off
- Fuel trim switched off.

Possible source
- Low fuel level
- Repeated cold starting where the engine coolant temperature (ECT) has reached normal operating temperature between starts
- Water in the spark plug wells
- Defective spark plug
- Contaminated or incorrect fuel
- Incorrect oil grade (summer fuel in winter, certain markets).
- Blocked / leaking injector
- Air leakage
- Blocked crankcase ventilation.
- Damaged VVT-unit.
- Faulty fuel pressure
- Uneven compression

Fault symptom[s]
- The malfunction indicator lamp (MIL) flashes
- The engine misfires
- The engine is difficult to start
- Deterioration in performance
- Uneven idle
- The engine is not firing on all cylinders.