Connecting the Breakout Box, Accessory Electronic Module (AEM)

Connecting the breakout box. Accessory electronic module

Connecting the breakout box




- Ignition off
- Expose the accessory electronic module.
Connect adapter 951 2843 Adapter 951 2843 Adapter to the control module connector. Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box to the adapter.
Disconnect the breakout box in reverse order.

Note! Before the central electronic control module can be checked and measurements taken, the removed fuses must first be installed.

Other information
- For further information about signals and other values, see Signal description. Accessory electronic module (AEM) Signal Description, Accessory Electronic Module (AEM)
- For information about the fuses and ground terminals, see the relevant wiring diagram.