Bag Holder

Bag Holder













INTRODUCTION

- NOTE: Read through the whole installation instruction before starting the work.

- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section

Bag holder

Preparations







- Remove the cover. Using a coin or similar, insert the coin in the groove. Carefully twist the cover loose.

Installing the bag holder







- Install the screws and washers in the mounting hook. Install one washer on the short screw in the front hole. Install three washers on the longer screw in the rear hole
- Secure the mounting hook in place. Tighten the screws a quarter turn.