Upholstery Head Restraint Front

Upholstery head restraint front

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparations

Note! To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part number: 3533976 is used and in some cases zip fastener 4 mm, part number: 9459316

Removing upholstery




Remove the head restraint. See Head restraint front seat Head Restraint Front Seat.
Cut the upholstery at the zip fastener.
Remove the upholstery.

Installing upholstery




Install the upholstery.
Close the zip fastener.

Note! Ensure that all seams are correctly positioned and the padding is not kinked under the upholstery.