Organiser Bag

Organiser Bag










INTRODUCTION

- NOTE: Read through the whole installation instruction before starting the work.

- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section

Organiser bag

HINT:
The organiser bag can be used with a PC table. The table is not included in the kit. This must be purchased separately.

Installing the bag

Illustration A applies when only the bag is to be used







- Securely lock the two straps around the lower section of the seat head restraint as illustrated.

Illustration B applies when the bag is used with a PC table







- Install the strap around the seat head restraint as illustrated.

Use

Illustration A applies when only the bag is to be used







Illustration B applies when the bag is used with a PC table







- Open the zip fastener. Fold out the bag as illustrated.

Securing the bag during a journey

Illustration A applies when only the bag is to be used







Illustration B applies when the bag is used with a PC table







WARNING: The bag must be secured using the seat belt during a journey. The bag must not contain more than a maximum of 3.5 kg (7.7 lb).

Applies to the bag without the PC table, before a journey
- Fold up the lower section of the bag. Close the zip fastener.

Applies ALWAYS before a journey
- Secure the bag using the seat belt as illustrated.

NOTE: Route the seat belt under the straps for the bag when the bag is used without the PC table.