Waste Paper Basket

Waste Paper Basket













INTRODUCTION

- NOTE: Read through the whole installation instruction before starting the work.

- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section

Waste paper basket

Preparations







- Remove the cover. Using a coin or similar, insert the coin in the groove. Carefully twist the cover loose.

Installing the mounting

Illustration A is for left-hand drive cars







Illustration B is for right-hand drive cars







Position 1:
- Take the shorter screw and three thin washers from the kit
- Slide two thin washers onto the screw
- Slide the screw through the mounting
- Slide a thin washer onto the screw.

Position 2:
- Take the longer screw and the three thin and the slightly larger washers from the kit
- Slide two thin washers onto the screw
- Slide the screw through the mounting
- Slide the slightly larger washer and then the remaining thin washer onto the screw.

Finally:
- Secure the mounting in place. Tighten the screws a quarter turn.

Installing the waste paper basket on the mounting







- Secure the waste paper basket on the mounting from above and down as illustrated.