Service Kit, Front Seat

Service kit, front seat

Operation number: 99444-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.






1. covers over seat rails
2. upper screw seat frame, 4 pcs.
3. Fold the backrest up.




Tilt the seat back in the vehicle.

Note! Do not disconnect any connections.

Installation

Note! For tightening torques, see Specifications.

Installing the service kit




The service kit contains cable ties, 3 pcs and a strut




Install the service kit.
Ensure that the strut does not obstruct the cable harness.





Note! On certain vehicles, there may be an existing cable tie, see the location in the image. Replace the old cable tie with the new one.

Install cable ties on the bracket and tighten.




Install the bar in the front groove and lock with the cable tie on each side and tighten the cable tie, see image.

To install, reverse the removal procedure.