Map Light: Service and Repair

Mounting Kit for the Front Reading Lamp, Front Seat

NOTE: The reading lamp is not included in the kit. The reading lamp must be purchased separately.

Preparations







- Wipe the seat frame clean on the marked surface at the centre console as shown in the above figure.
- Remove the backing from the piece of tape. Apply the tape around the seat frame so that the tape joins at the reverse of the seat frame.

Installing the lamp mounting







- Install the lamp mounting on the piece of tape around the seat frame as close to the centre console as possible. Tighten the mounting using the screw (1)
- Adjust the lamp mounting to the desired position. Tighten using the screw (2)
- Install the reading lamp in the mounting. Connect the cable to the cigarette lighter socket.

Disassembling the reading lamp when replacing the bulb







Remove the lamp glass. First carefully pry off the top edge of the lamp using a small screwdriver.