Checking the Direction Indicator Display

Checking the direction indicator display

Checking the shunt and wires
Check the fuse 11C/21.
Check the connection between the fuse 11C/21 and the central electronic module (CEM) B23 ( E3).
Check that the shunt 2 has a flasher signal, 20/32 for left direction indicator and 20/34 for right direction indicator.
Check the wire between the shunt 2 and each direction indicator as shown in the table below.





Check relevant ground connection.

Hint: Ground connection is 3 for front flasher, 1 for side flasher and 1B for rear flasher.

Additional information
- For information on ground points, see wiring diagram.






Continue - Fault Found

-------------------------------------------------