Ignition Switch: Service and Repair

Starter switch, replacing

Removal

Preparations
- Remove the steering column covers. See Replacing the steering column covers, B5244T5, B5254T2 Service and Repair.

Start switch




- Remove the screws and bracket
- Slacken off the screws
- Disconnect the connector.

Installation

- Install the connector on the start switch
- Position the start switch on the steering wheel lock
- Install the screws and bracket
- Check the function
- Install the steering column covers. See Replacing the steering column covers, B5244T5, B5254T2 Service and Repair.