Drive Shaft For Height Adjustment (Aluminum Rail)

Drive shaft for height adjustment (Aluminum rail)

Removing the drive shaft for height adjustment




Remove the motor for height adjustment. See Height adjustment motor, front Height Adjustment Motor, Front and Height adjustment motor, rear Height Adjustment Motor, Rear.
Disconnect the connector.
Remove the bushing and the bearing (felt).

Note! Be careful with the bushing.

Unscrew and remove the drive shaft with the rack.

Note! Ensure that the gears do not move during the operation. There is a risk of function failure and increased wear.

Installing the height adjustment drive shaft

Install:
- the drive shaft
- the bushing
- the connector
- the height adjustment motor. See Height adjustment motor, front Height Adjustment Motor, Front and Height adjustment motor, rear Height Adjustment Motor, Rear.