Operation CHARM: Car repair manuals for everyone.

Signal Too Low. Intermittent Fault






Signal too low. Intermittent fault

Checking wiring and connectors




- Ignition off.
Check the wiring and connectors between rear control module terminal #B26 (#E6) and the battery. Check for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. Check for loose connections according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. Check for contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. Check for damage carefully.
Check the wiring between rear control module terminal #B21 (#E1) and the ground terminal for an open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. Check for damage carefully.
Remedy as necessary.

Other information:
- To access the rear control module connector, see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing Integrated Relay/Fusebox Cargo Compartment/Rear Electronic Module (REM), Replacing
- To connect the breakout box, see Connecting the breakout box Connecting Breakout Box, Rear Electronic Module (REM).





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Exit fault-tracing

------------------------

Attempt New Test - Checking wiring and connectors

-------------------------------------------------