Diagnostic Trouble Code Information

Diagnostic trouble code information

Condition
The control units communicate with each other via a standardized serial method of communication - CAN (Controller Area Network) - to exchange information. Control units send and receive information. If the steering wheel angle sensor (SAS) control unit registers an internal fault, diagnostic trouble code SAS-0019 is set.





Substitute value
- Stabilizing function disconnected.
- Anti-spin function blocked.

Possible source
- Internal fault in the steering wheel angle sensor control unit.

Fault symptom[s]
- Anti-spin warning lamp is on.
- Stabilizing function not working.
- Anti-spin does not work.