Invalid Combination. Permanent Fault

Invalid combination. Permanent fault

Replacing the windshield wiper switch
Replace the windshield wiper switch because an internal fault has been found.

Other information:
- To replace the windshield wiper switch, see Washer / wiper switch, replacing Service and Repair.

Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After the repair it is necessary to check that the fault has been rectified.








- Ignition off.
- Connect connectors, install components, etc.
- Ignition on.
Check that all switch functions work.





Does switch work?

Yes - Verification completed

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Replacing the windshield wiper switch

-------------------------------------------------