Replacing the In / Out Switch For the Seat / Turn Table

Replacing the in / out switch for the seat / turn table

Removal




- Remove the turn table. Replacing the Turn Table
- Remove the nuts for the switch
- Cut off the cable for the switch
- Lift out the switch with the screws and cover.

Installation




- Install the cable for the switch
- Install the connector
- Install the switch, screws and turn table
- Lift up the screws. Use a screwdriver for example
- Install and tighten the nuts
- Connect the connector
- Reinstall other components in reverse order.

Function test
- Move the turn table to the dismount (maximum) position
- Ignition on
- The buzzer should sound
- Ignition off
- Lower the seat / turn table (to the driving position)
- The buzzer should not sound
- Ignition off.