Switch, Turntable and Seat

Switch, turntable and seat

Removal





Remove:
- the turn table. Replacing the Turn Table
- the screws for the actuator. Fold up the actuator
- the screws for the switch
- the switch.

Installation





Install:
- the switch
- the screws for the switch
- the screws for the actuator. Fold up the actuator
- the turn table.

Function test
- Raise the seat / turn table
- Ignition on
- The buzzer should sound
- Ignition off
- Lower the seat / turn table
- Ignition on
- The buzzer should not sound
- Ignition off.

Note! The seat / turntable cannot be maneuvered if the LED on the control unit is not lit. Also see Replacing the switch for the seat rail Replacing the Switch For the Seat Rail.