Connecting the Breakout Box, Power Seat Module (PSM)

Connecting the breakout box, power seat module (PSM)

Special tools:
951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin
951 1428 Breakout box 951 1428 Breakout Box
951 1499 Cable 951 1499 Cable
951 1507 Adapter 12-12-8-4-2 Pin 951 1507 Adapter 12-12-8-4-2 Pin

Connecting the breakout box
- Ignition off
- Remove passenger compartment fuse 24 (11C/24) and passenger compartment fuse 4 (11C/4)
- Remove the power seat module (PSM). See Power seat module (PSM), replacing Service and Repair
- Disconnect the module connectors.
There are two adapters for the power seat:
Connect adapter951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin to control module connector C to take readings from the connector.
Connect adapter951 1507 Adapter 12-12-8-4-2 Pin 951 1507 Adapter 12-12-8-4-2 Pin to control module connectors A, B, D and E. Connect breakout box951 1428 Breakout box 951 1428 Breakout Box and one or two cables951 1499 Cable 951 1499 Cable to the adapters.
Disconnect the breakout box in reverse order.
For further information about signals and other values, see Signal specification, Power seat module Signal Specification, Power Seat Module (PSM).