Checking the Courtesy Light

Checking the courtesy light

Checking the courtesy light




Programming the home safe lights

Programming the home safe lights
The home safe lights can be programmed to stay on for a longer or shorter time according to the wishes of the customer.
The factory setting is 30 seconds. The time can be set to 0, 30, 60 or 90 seconds.
Read off the programming by clicking on the VCT2000 symbol.
To change the time set, mark the desired value in the scrolling list and start programming.





Continue - Save the programmed value

------------------------

Save the programmed value
To ensure that the programmed information is stored, click on the VCT2000 symbol to force the entry.





Continue - DONE

------------------------

DONE - FAULT FOUND

-------------------------------------------------