Auxiliary Lights, Installation Kit

Auxiliary spotlamps

- Pry the light insert from the lamp housing using the tool supplied.

- Install the rubber grommet and the metal ring on the lamp housing.

Illustration A

The spot lamp can be installed in several different ways. See the illustration.

Illustration B

- Install the mounting in the required way on the lamp housing. Use two screws and two washers.

- Insert the cables through the lamp housing
- Install the flat pin contactors on both the cables
- Supply the blue cable (BL) with a socket housing to prevent short-circuits
- Connect the blue cable (BL) to the cable for the lamp
- Connect the black cable (SB) to ground on the light insert.

- Assemble the light insert and the lamp housing. Carefully stretch the cables
- Install the spot lamp on the bracket.