Fog Lamps

Fog lamps




















Fog lamps

Note! This accessory is connected to the car's electrical system. It requires software unique to the car.

Carry out the following points for the left and right-hand fog lamps




- Raise the car
- Remove the cover (1) by releasing the plastic catch (2) and pressing it together according to A-A. Pull the cover forward.




- Remove the screws (1). Slacken off the air baffle (2)
- Release the catches (3). Pull the air baffle backward
- Remove the air baffle.




- Disconnect the existing connector (1) for the fog lamp
- Install the spring nuts (2) in the holes.




- Install the fog lamp using the screws (1) from the kit
- Connect the connector (2) to the fog lamp.

- Reinstall the air baffle
- Lower the car.




- Remove the cover (1) for the fuse holder
- Install a 15 A fuse: in terminal 3 for model year -00 cars.in terminal 18 for model year 01 cars-.
- Reinstall the cover.




- Move the left front seat to its rearmost position
- Remove the side panel (1). First slacken off the screw clip in the rear edge of the panel
- Remove the soundproofing panel (2). Carefully pry it loose. Use a weatherstrip tool or similar. The soundproofing panel is secured using three clips (3).




- Install the relay (1) from the kit in the relay holder socket marked MI11
- Reinstall the soundproofing panel and the side panel.




- Remove the cover (1) from the lighting control panel
- Install the light bulb (2)
- Install the button (3) from the kit. Press the button into place
- Program the software. See the service information in VIDA
- Check the function. Align the lamps.