Backrest

The backrest

Removing the backrest (40%)
Fold up or remove the cushion(s) according to Cushion Cushion.

Remove:
- the side cushion according to Side cushion Side Cushion
- the lock side piece according to Lock side piece Lock Side Piece
- the backrest lock according to Backrest catches Backrest Catches
- the backrest panel
- the outer head restraint according to Outer head restraint Outer Head Restraint
- the half moon clips at the bottom of the backrest by first opening the zip fastener
- the half moon clips in the channels
- the moldings on the frame.
Move the guide to the side.

Note! To remove the larger cushion, first remove the smaller cushion.

- Remove the backrest(s)
- Remove the two screws from the end mounting (48 Nm)
- Remove the stop(s) from the seat belt buckle on the fold-down mechanism (hooked into place on the lower edge of the backrest).

Removing the backrest (60%)

Note! To remove the larger cushion, first remove the smaller cushion.

Remove:
- the cushion(s) according to Cushion Cushion
- the side cushion according to Side cushion Side Cushion
- the lock side piece according to Lock side piece Lock Side Piece
- the backrest lock according to Backrest catches Backrest Catches
- the backrest panel
- the central head restraint according to Center head restraint Center Head Restraint
- the center armrest according to Armrest Armrest.

Installing the backrest





Install:
in reverse order.

Note! Ensure that the upholstery support is correctly installed.