BCM-0111

BCM-0111: Communications Between Control Modules, AYC Stabilization Takes Too Long
Condition





Note! The Diagnostic Trouble Code (DTC) applies only to cars with Dynamic Stability And Traction Control (DSTC).

Diagnostic Trouble Code (DTC) BCM-0111 is stored if the Brake Control Module (BCM) registers that the wheel or steering wheel alignment is incorrect.

Substitute value
- Traction control is blocked
- Stability control is blocked
- Active yaw control is blocked.

Hint: For information about abbreviations, Refer to Description and Operation.

Possible source
- Incorrect wheel alignment
- Incorrect steering wheel alignment
- Defective steering wheel angle sensor.

Fault symptom[s]
- The anti-spin warning lamp is lit (up to and including 2002 model year)
- General yellow warning lamp lit (from model year 2003 inclusive)
- Anti-spin does not function
- The stability control system does not function
- The traction control system does not function.