Replacing the Turn Table

Replacing the turn table

Removal




- Remove the seat. See Replacing the seat Replacing the Seat
- Remove the front screws
- Bridge across the black connectors for the turn table
- Raise the turn table using the control unit
- Remove the rear screws for the turn table
- Lower the turn table
- Tip or turn the turn table towards the rear seat
- Separate the 3 connectors
- Remove the turn table.

Installation
In reverse order

Note! Thread sealant 115 1053 must be applied to the screws for the seat and turn table.

Tighten the screw for the turn table. Tighten to 40 Nm.