Windscreen Removal

Windscreen removal

Special tools:
115 9784 PULLER HANDLE 115 9784 Puller Handle
115 9783 COUNTERHOLD CHISEL 115 9783 Counterhold Chisel
115 9785 PIANO WIRE 0.5 MM 115 9785 Piano Wire 0.5 mm

Special tools:
951 2335 Window lifter 2 pieces 951 2335 Window Lifter 2 Pieces

Windscreen removal
Open bonnet.
Remove the windscreen wipers.
Loosen the plenum covering as described inand pull it forwards in the carriage.




Remove the strips along the A pillars and the roof as described in Weatherstrips and trim strips Weatherstrips and Trim Strips.

Remove:
- the roof sealing strip.
- the guide strip on the lower edge.
- A pillar panels as described in

Note! Be careful not to damage the paint. Tape the A pillars with masking tape.




Pierce the wire through the PUR glue from the inside and out.
Pull through the wire from the outside using long nose pliers.
Fix the wire in the draw-handle on the outside and in the counterhold on the inside of the car.




Two people:
Press the counterhold as firmly as possible against the edge. Pull steadily on the draw-handle from the outside with uniform force.
Pause now and again and move the counterhold gradually forward.
"Saw" past the corners. Be extra careful near the roof edge strip.
Be careful not to damage the equipment and paint.




Install the suction cups951 2335 Window lifter 2 pieces 951 2335 Window Lifter 2 Pieces on the window and lift it out.
For handling PUR on the body flange, see PUR on body flange .