Tightening Torque

Intermediate section
Step 1 (M10) 20Nm
Step 2 (M10) 45 Nm
Step 3 (M8) 24 Nm
Step 4 (M7) 17 Nm
Step 5 (M10) angle tightening 90°
Tighten the screws in sequence from the center and outwards.

Center nut/Vibration damper (crankshaft's front end) 180 Nm

Vibration damper (flange bolt M8x25)
Step 1 25 Nm
Step 2 angle tightening 60°