DTC 65

DTC 65: Brake Fluid Level
1. Check the brake fluid level.
Is the level correct?
YES - Go to step 2.
NO - Refill the brake fluid, and recheck.
2. Check the brake fluid level switch.
Is the switch OK?
YES - Check for short on the GRN/BLU wire from the VSA control unit 47P connector and the brake fluid level switch. If OK, check for loose terminals in the VSA control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, and recheck.
NO - Replace the brake fluid level switch.