DTC 66

DTC 66: VSA Pressure Sensor (Inside of VSA Modulator-Control Unit)
1. Clear the DTC.
2. Remove the HDS from the 16P DLC.
3. Test-drive the vehicle.
Does the ABS indicator come on, and is DTC 66 indicated?
YES - Go to step 4.
NO - The system is OK at this time.
4. Do the VSA sensors neutral position memorization. Programming and Relearning
5. Clear the DTC.
6. Disconnect the HDS from the 16P DLC.
7. Test-drive the vehicle.
Does the ABS indicator come on, and is DTC 66 indicated?
YES - Replace the VSA modulator-control unit.
NO - The system is OK at this time.