DTC 84

DTC 84: VSA Sensors Neutral Position
1. Clear the DTC.
2. Disconnect the HDS from the 16P DLC.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Test-drive the vehicles.
Does the VSA indicator come on, and is DTC 84 indicated?
YES - Go to step 5.
NO - The system is OK at this time.
5. Do the VSA sensor neutral position memorization. Programming and Relearning
6. Clear the DTC.
7. Disconnect the HDS from the 16P DLC.
8. Turn the ignition switch OFF, then turn it ON (II) again.
9. Test-drive the vehicles.
Does the VSA indicator come on, and is DTC 84 indicated?
YES - Replace the VSA modulator-control unit.
NO - The system is OK at this time.