DTC 87

DTC 87: Current Flow into Wheel Sensor Input Amplifier

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Check for DTCs with the HDS.

Is DTC 87 indicated?

YES - Do the DTC 11, 13, 15, and/or 17 troubleshooting. DTC 11

NO - Intermittent failure, the system is OK at this time. Check for loose terminals at the VSA modulator-control unit 46P connector. Refer to intermittent failures troubleshooting. How to Troubleshoot DTCs