Hood Latch: Service and Repair

Hood Latch Replacement

1. Remove the front bumper. Front Bumper

2. Detach the clips, then remove the hood lock cover (A).






3. Disconnect and detach the hood latch switch connector (A).

4. Remove the bolts, then remove the hood latch (B) from the body, and disconnect the hood opener cable (C) from the hood latch.






5. Install the latch in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Apply multipurpose grease to each location of the hood latch indicated by the arrows.

- Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly.

- Adjust the hood latch alignment. Adjustments

- Make sure the hood opens properly and locks securely.