Sunlight Sensor Test

Sunlight Sensor Test

1. Remove the sunlight sensor. Service and Repair

2. Turn the ignition switch to ON (II). Measure the voltage between the terminals with the (+) probe on the No. 1 terminal and the (-) probe on the No. 2 terminal with the connector connected.
NOTE: The voltage readings will not change under the light of a flashlight or a fluorescent lamp.

Voltage should be:

- 3.6-3.7 V or more with the sensor out of direct sunlight.

- 3.3-3.5 V or less with the sensor in direct sunlight.

3. If the voltage is not as specified, replace the sunlight sensor. Service and Repair