Steering Angle Sensor: Service and Repair

VSA System Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch; the steering angle sensor is sensitive to shock and vibration.

1. Make sure the ignition switch in LOCK (0).

2. Remove the steering wheel Steering Wheel Removal and steering column cover. Service and Repair

3. Remove the combination switch assembly. Steering Column Removal and Installation

4. Remove the cable reel. Service and Repair

5. Remove the combination light switch (A) and the wiper/washer switch (B).

6. Replace the combination switch body (C).

7. Install the combination switch in the reverse order of removal.
NOTE: Do not remove the steering angle sensor from the combination switch body.

8. After installation, do the steering angle sensor center point writing. Testing and Inspection