B1002

DTC Troubleshooting: B1001, B1002

DTC B1001:

MICU Internal Error (CPU error)

DTC B1002:

MICU Internal Error (EEPROM error)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Wait for at least 6 seconds or more.

4. Check for DTCs with the HDS.

Is DTC B1001 and/or B1002 indicated?

YES -

Faulty MICU, replace the under-dash fuse/relay box Under-Dash Fuse/Relay Box Removal/Installation.�

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections. If all connections are good, check battery condition, and the charging system.�