Operation CHARM: Car repair manuals for everyone.

Removal and Replacement




Alternator Removal and Installation

Removal

1. Do the battery terminal disconnection procedure Procedures.

2. Remove the drive belt Service and Repair.

3. Remove the front bumper Front Bumper.

4. Remove the clip (A), then remove the coolant reservoir (B) from the holder.






5. Remove the support rod clamp bracket (A).






6. Disconnect the A/C condenser fan motor connector (A), then remove the A/C condenser fan shroud assembly (B).






7. Disconnect the alternator connector (A) and BLK wire (B), then remove the harness clamp (C) from the alternator.






8. Remove the alternator.






Installation

1. Install the alternator.






2. Connect the alternator connector (A) and BLK wire (B), then install the harness clamp (C) to the alternator.






3. Install the A/C condenser fan shroud assembly (A), then connect the A/C condenser fan motor connector (B).






4. Install the support rod clamp bracket (A).






5. Install the coolant reservoir.






6. Install the drive belt Service and Repair.

7. Install the front bumper Front Bumper.

8. Do the battery terminal reconnection procedure Procedures.