Control Unit: Service and Repair

SH-AWD Control Unit Replacement

NOTE: The SH-AWD control unit must be initialized after replacement, otherwise the SH-AWD system will not function.

1. Remove the rear left side trim panel cover (A).






2. Loosen the SH-AWD control unit mounting bolts (A), then remove the SH-AWD control unit (B).





3. Disconnect the SH-AWD control unit connectors (C).

4. Install the SH-AWD control unit in the reverse order of removal.

5. Do the SH-AWD control unit initialization SH-AWD Control Unit Initialization.