Navigation Display: Service and Repair

Navigation Display Unit Removal/Installation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
- When prying components, use the KTC trim tool or equivalent.

1. Remove the dashboard center upper panel Dashboard Center Upper Panel Removal/Installation.

2. Remove the screws (A) and bolt (B), then remove the display unit (C).





3. Disconnect the navigation display unit connector (D), and detach the clip (E).

4. Install the unit in the reverse order of removal. Be careful not to drop the forward bolt behind the dashboard.