Front Inner Fender Replacement

Front Inner Fender Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the front inner fender (A).

1. On the back of the wheel arch, remove the screws (B), then remove the splash guard (C).

2. From under the front bumper (D), remove the bolt (E) and the clips (F) securing the front bumper and the front inner fender.

3. From the wheel arch, remove the screw (G) securing the front bumper.

4. From the wheel arch, remove the clip (H) securing the front splash shield (I) and the front inner fender, and remove the clips (J) securing the front inner fender on the body.

5. Pull out the front inner fender.





2. Install the inner fender in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.