Front Undercover Replacement

Front Undercover Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the bolts (A), and the clips (B), then remove the front undercover (C) from the splash shield (D), the front suspension subframe (E), and the front subframe stiffener (F).





2. Install the undercover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.