A/T Shift Lever Bracket Base Replacement

A/T Shift Lever Bracket Base Replacement

NOTE:

- Refer to the Shift Lever Disassembly/Reassembly A/T Shift Lever Disassembly/Reassembly during the following procedures.
- Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.

1. Remove the shift lever A/T Shift Lever Removal.

2. Grasp the shift lever boot ring, and slip it out of the shift lever knob cover.






3. Remove the screws (A), and remove the shift lever knob (B).






4. Remove the A/T gear position indicator panel light socket from the indicator panel, and remove the indicator panel from the shift lever bracket base.

5. Remove the A/T gear position indicator panel light bulb from the socket.

6. Remove the shift lock release Shift Lock Release Replacement.

7. Remove the shift lock solenoid Service and Repair.

8. Remove the shift lock stop and the stop cushion as an assembly Shift Lock Stop/Shift Lock Stop Cushion Replacement.

9. Replace a shift lever bracket base.

10. Install the shift lock stop and the stop cushion Shift Lock Stop/Shift Lock Stop Cushion Replacement.

11. Install the shift lock solenoid Service and Repair.

12. Install the shift lock release Shift Lock Release Replacement.

13. Install the A/T gear position indicator panel light bulb in its socket.

14. Install the A/T gear position indicator panel A/T Shift Lever Boot and A/T Gear Position Indicator Panel Replacement.

15. Install the shift lever knob A/T Shift Lever Knob Replacement.

16. Install the shift lever A/T Shift Lever Installation.