Removal and Replacement

Alternator Removal and Installation

Removal

1. Do the battery terminal disconnection procedure.

2. Remove the drive belt Service and Repair.

3. Remove the clip (A), then remove the coolant reservoir (B) from the holder.






4. Remove the two bolts and the four clips from the front grille base (A), then remove the support rod clamp bracket (B).






5. Disconnect the A/C condenser fan motor connector (A), then remove the A/C condenser fan shroud assembly (B).






6. Disconnect the alternator 4P connector (A) and the positive alternator cable (B), then remove the harness clamp (C) from the alternator.






7. Remove the alternator.






Installation

1. Install the alternator.






2. Connect the alternator 4P connector (A) and the positive alternator cable (B), then install the harness clamp (C) to the alternator.

Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.






3. Install the A/C condenser fan shroud assembly (A), then connect the A/C condenser fan motor connector (B).






4. Install the support rod clamp bracket (A), then install the two bolts and the four clips.






5. Install the coolant reservoir.






6. Install the drive belt Service and Repair.

7. Do the battery terminal reconnection procedure.