Front Inner Fender Replacement

Front Inner Fender Replacement

NOTE:

- Take care not to scratch the body or the related parts.
- Put on gloves to protect your hands.

1. Remove the front inner fender (A).

1. On the back of the wheel arch, remove the screws (B) and on Canada models, remove the front splash guard (C).

2. From under the front bumper (D), remove the screw (E) and the clip (F) securing the front bumper, the splash shield (G), and front inner fender.

3. From the wheel arch, remove the screws (H) securing the front bumper.

4. From the wheel arch, remove the clips (I, J) securing the front inner fender (and the splash shield) to the body.

5. Remove the front inner fender.

NOTE: To release the clips F and J, pry up on the center pin at the notch (K).





2. Install the inner fender in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.