DTC 108

DTC 107: TCS Operation
DTC 108: VSA Operation

NOTE: The ABS/VSA indicators do not come on when DTC 107 or DTC 108 are stored.

1. Clear the DTC using the HDS.
2. Disconnect the HDS from the 16P DLC.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Test-drive the vehicle.
Is DTC 107 or DTC 108 indicated?
YES - Check for loose terminals in the VSA modulator-control unit 47P connector. Replace the VSA modulator-control unit, and recheck.
NO - Intermittent failure; the system is OK at this time.