DTC 44-41

DTC 44-41: SH-AWD Control Unit Power Supply Stuck OFF

NOTE: Before you troubleshoot, review the general troubleshooting information.

1. Turn the ignition switch ON (II).
2. Make sure the HDS communicates with the vehicle and the SH-AWD control unit. If it doesn't, troubleshoot the DLC circuit.
3. Clear the DTC with the HDS.
4. Start the engine.
5. Check for DTCs with the HDS.

Is DTC 44-41 indicated?

YES - Replace the SH-AWD control unit.

NO - Intermittent failure, the system is OK at this time.