DTC 65

DTC 65: Brake Fluid Level

1. Check the brake fluid level.

Is the level correct?

YES - Go to step 2.

NO - inspect the brake system for fluid leaks. If no leaks are found, check for all worn brake pads.

2. Disconnect gauge control module connector B (28P) and brake fluid level switch 2P connector.
3. Check for continuity between terminal No. 13 of gauge control module connector B (28P) and body ground.





Is there continuity?

YES - Repair short to body ground in the wire between gauge control module connector B and the brake fluid level switch.

NO - Go to step 4.

4. Check the brake fluid level switch.

Is the switch OK?

YES - Do the troubleshooting for the gauge control module.

NO - Replace the brake fluid level switch.